Previous image
42 Draft Designs - VR6 High Flow Cat
Next image
Zoom image

42 Draft Designs - VR6 High Flow Cat


Not rated yet
Looking to enhance the sound of your vehicle and free-up additional HP?
Available
  • $195.00
Qty:  
Add a different product to compare
  • Shipping info

    We deliver worldwide: UPS, USPS, DHL - or pickup your order in Westlake, Ohio

  • Payment methods

    logos-payments-tab_1.png

  • Return Policy

    We accept returns; please see the Returns and Refunds Page for more info.

  • Weight
    15 lbs
  • SKU
    EX-03-120

The 42DD VR6 high flow cat is the performance fit! The stock catalytic converter on most VR6 vehicles
is a lengthy 600 cell catalyst. While failures are infrequent, replacement with a high-flow cat yields better
exhaust flow & mild HP gains. This VR6 high flow cat uses a Magnaflow 200 cell metal cat in a spun
stainless steel body. A CNC machined flange & TIG welded construction result in a perfect fit every time.

This VR6 high flow cat is available reduced to fit the stock sleeve clamp, or 2.5" through to fit 2.5" cat-backs.
A fresh OEM gasket & replacement hardware is included with every pipe. Two oxygen sensor bungs are
welded in and a plug is included for the extra. OBD1 cars use the pre-cat bung. OBD2 cars use the post-cat
bung. Though based on the mk3 VR6 cat, our high flow cat fits a wide range of VWs. Check out the
application guide below to choose the correct cat for your vehicle.

Fits:

VW MK3 Jetta, Golf, GTI 1994-1999 VR6 & 2.0
VW MK2 Jetta, Golf, GTI 1985-1992 8v & 16v
VW B3/B4 Passat up to 1997 VR6, 2.0, & 16v
VW Corrado 1989-1995 G60

Fitment:

  • Fits exactly like the stock cat.
  • No cutting or custom fitment required
  • Oxygen sensor bung location suits every vehicle without modification of heatsheilds or sensor wiring.
  • OBD1 & OBD2? Don't worry, one model fits all.
  • Includes grade 5 hardware and OEM gasket
  • Available reduced to fit stock band clamp or 2.5" through
  • Installation Instructions included
  • Replacement sleeve clamps available

Available Options:

  • Pipe Size

Construction:

  • Magnaflow 200 cell 409 stainless steel cat
  • 14 gauge aluminized steel tubing
  • CNC machined flange mates exactly to the stock flange
  • TIG welded construction
  • 2.5" piping reduces to stock 2.150" band clamp for a bolt-on fit

Additional Information:

Legality:

  • This catalytic converter is 49 state legal (excluding California)
  • Emissions compliance is the sole responsibility of the vehicle's owner.
  • May cause 'catalyst below efficiency' fault code and / or check engine light (CEL) to
    illuminate in the instrument cluster.

2.5" Through - Fitment Details:

The VR6 high flow cat is available in 2.5" through. This cat fits exactly like the original but lacks the reduction
to stock band clamp size. This allows for a straight-through fitment when using 2.5" exhaust. Our 2.5" through
cat terminates at the center of the stock band clamp. Many 2.5" cat-back exhaust systems for the mk3 VR6
have a built in reduction to the stock band clamp size. In this case, the cat-back exhaust system will need to be
modified. The reduction will need to be removed, a 2.5" section of pipe added and a 2.5" band clamp added.
Many cat-back exhaust systems begin at the center of the stock band clamp as 2.5". In this case no modification
is required and a band clamp should be used. Due to the variances in aftermarket cat-back designs we cannot
provide a 100% bolt-on 2.5" through cat for any or all aftermarket exhaust systems

Fitment

Make Model Year Engine
  • Manufacturer
    42 Draft Designs
  • Optional Coating
    None, Ceramic Coated
  • Fitment
    Adapted to Stock Catback (EX-03-110), 2.5in Through (EX-03-111)
  • Add Sleeve Clamp?
    2.50 inch (EX-99-201), None, 2.15 inch (EX-99-201)
Customer reviews
Please sign in to add review
There are no comments yet. Be the first to leave a comment

Most parts are available for local pick-up with no shipping or handling charge. Please select the in-store pickup option during checkout. Once we receive your order you will be contacted to schedule your pick-up.

Once your order has been shipped, and if the method of shipping has been assigned a tracking number you will be notified of the number. Please note that carriers such as UPS may not update the tracking number status until late in the evening when the daily pickups have been recorded.

In the event your order arrives and an item is damaged, notify HS Tuning within 5 business days after receiving shipment. Make sure to not discard the box(s), packing materials or broken/damaged product(s). If this occasion arises, we require that you obtain a damage claim number from UPS by calling 1-800-742-5877. During the call you will need to supply them with the information from your shipping label. After obtaining a claim number, contact HS Tuning. If a part is missing from your order, you must contact HS Tuning by either by phone at 216-577-7171 or email at This e-mail address is being protected from spambots. You need JavaScript enabled to view it within 5 business days of receiving your shipment. After 5 business days have passed, HS Tuning will no longer be held responsible.

We accept the following payment methods:


Returns, Refunds, Warranty

Returns will not be accepted after 30 days of purchase, and a 15% restocking fee applies to all orders that are not a result of an error made by HS Tuning. Returns will be refused if the part is not:
- In the original packaging and undamaged.
- Product has not been installed.
- Complete with all parts, manuals and print material.

Please note the following parts are not returnable:
- Electrical components
- ECU Software
- Repairs Manuals
- Tools
- Wheels and Tires
- Hand fabricated and custom parts
- All parts identified as special order

Before any item is returned, HS Tuning requires an RMA (Return Merchandise Authorization) number for all returns. RMA numbers can be issued by phone at 216-577-7171 or email This e-mail address is being protected from spambots. You need JavaScript enabled to view it

HS Tuning
Attn: Returns Department
30205 Clemens Road Unit A
Westlake, OH 44145

Your RMA number must be visible on the outside of the packaging in order for your return to be processed properly.

Product Warranty:

HS Tuning offers only quality products to its customers. If your part fails due to defects in workmanship or materials within the first year of ownership, contact HS Tuning and provide us with a copy of your original invoice as proof of purchase. HS Tuning will not refund money, but will work with you to replace or warranty parts. Either HS Tuning or the product manufacturer will test or inspect the product before a warranty claim adjustment is finalized. Any product that fails due to misuse, neglect, unintended application or improper installation will not be covered under any warranty. HS Tuning is not liable for consequential and incidental damages and/or costs incurred of any kind, including those caused by products sold by HS Tuning.

In addition to the parts listed above that are non-returnable, HS Tuning cannot offer any full warranty coverage on wearable mechanical items and electrical components.

Apple’s commitment to your privacy

At Apple, your trust means everything to us. That’s why we respect your privacy and protect it with strong encryption, plus strict policies that govern how all data is handled.

Security and privacy are fundamental to the design of all our hardware, software, and services, including iCloud and new services like Apple Pay. And we continue to make improvements. Two-step verification, which we encourage all our customers to use, in addition to protecting your Apple ID account information, now also protects all of the data you store and keep up to date with iCloud.

We believe in telling you up front exactly what’s going to happen to your personal information and asking for your permission before you share it with us. And if you change your mind later, we make it easy to stop sharing with us. Every Apple product is designed around those principles. When we do ask to use your data, it’s to provide you with a better user experience.

We’re publishing this website to explain how we handle your personal information, what we do and don’t collect, and why. We’re going to make sure you get updates here about privacy at Apple at least once a year and whenever there are significant changes to our policies.

A few years ago, users of Internet services began to realize that when an online service is free, you’re not the customer. You’re the product. But at Apple, we believe a great customer experience shouldn’t come at the expense of your privacy.

Our business model is very straightforward: We sell great products. We don’t build a profile based on your email content or web browsing habits to sell to advertisers. We don’t “monetize” the information you store on your iPhone or in iCloud. And we don’t read your email or your messages to get information to market to you. Our software and services are designed to make our devices better. Plain and simple.

One very small part of our business does serve advertisers, and that’s iAd. We built an advertising network because some app developers depend on that business model, and we want to support them as well as a free iTunes Radio service. iAd sticks to the same privacy policy that applies to every other Apple product. It doesn’t get data from Health and HomeKit, Maps, Siri, iMessage, your call history, or any iCloud service like Contacts or Mail, and you can always just opt out altogether.

Finally, I want to be absolutely clear that we have never worked with any government agency from any country to create a backdoor in any of our products or services. We have also never allowed access to our servers. And we never will.

Our commitment to protecting your privacy comes from a deep respect for our customers. We know that your trust doesn’t come easy. That’s why we have and always will work as hard as we can to earn and keep it.

Tim Cook
CEO, Apple Inc.